ENBL=0, TRIG=0
Channel Configuration register
| SOURCE | DMA Channel Source (Slot) |
| TRIG | DMA Channel Trigger Enable 0 (0): Triggering is disabled. If triggering is disabled, and the ENBL bit is set, the DMA Channel will simply route the specified source to the DMA channel. (Normal mode) 1 (1): Triggering is enabled. If triggering is enabled, and the ENBL bit is set, the DMAMUX is in Periodic Trigger mode. |
| ENBL | DMA Channel Enable 0 (0): DMA channel is disabled. This mode is primarily used during configuration of the DMA Mux. The DMA has separate channel enables/disables, which should be used to disable or re-configure a DMA channel. 1 (1): DMA channel is enabled |